KeyLink II

Legacy

Designed for ease of integration, the KeyLink II programmers are stand-alone interface units that connect quickly to host hardware via a standard RS-232 or USB port.  The KeyLink II programmers support interchangeable use of serial memory keys including all of Datakey's Microwire, I2C and SPI interface protocols.   Each supported key is read and/or written by sending commands and data over the communication interface.  The programmer will respond with feedback data and a status response allowing the user to easily monitor the communications with the KeyLink II programmer. The KeyLink II programmer is packaged with a communication cable, configuration software, external power supply (for RS-232) and an integration manual.  A Serial Development Kit is available which also includes key samples as well as Keyceptacle® samples.

Specifications

KeyLink IIs KeyLink IIu KeyLink IIse
Part Number607-0065-000A607-0065-001A607-0065-002A
Development Kit Part No.Not recommended for new designs. Use KeyLink III.Not recommended for new designs. Use KeyLink III.Not recommended for new designs. Use KeyLink III.
PC InterfaceRS-232 (DB9F)USB A male to USB B maleRS-232 (DB9F)
Power9 VDC via 3.5 mm jack, 230 VAC to 9 VDC supply included.No external power9VDC via 3.5mm jack, 230VAC to 9VDC supply included.
Throughput2400, 4800, 9600 or 19200 baudNA2400, 4800, 9600 or 19200 baud
Receptacle Contact Life200,000 cycles min.200,000 cycles min.200,000 cycles min.
Operational Temperature0 ˚C to +70 ˚C0 ˚C to +70 ˚C0 ˚C to +70 ˚C
Storage Temperature-40 ˚C to +85 ˚C-40 ˚C to +85 ˚C-40 ˚C to +85 ˚C
Used WithAll serial EEPROM and NOR flash keys, except IEK.

For better throughput with NOR flash keys use the KeyLink III.
All serial EEPROM and NOR flash keys, except IEK.

For better throughput with NOR flash keys use the KeyLink III.
All serial EEPROM and NOR flash keys, except IEK.

For better throughput with NOR flash keys use the KeyLink III.
Supporting Operating SystemsThe configuration software runs on Windows PC.The configuration software runs on Windows PC.The configuration software runs on Windows PC.
Included AccessoriesRubber feet, hook-and-loop mounting pads, 6' DB9M to DB9F cable and 230 VAC to 9 VDC power supplyRubber feet, hook-and-loop mounting pads, 6' USB A male to USB B male cable.Rubber feet, hook-and-loop mounting pads, 6' DB9M to DB9F cable and 230 VAC to 9 VDC power supply
ComplianceRoHS CompliantRoHS CompliantRoHS Compliant
Other Features

NA

NA

NA

Datasheet (PDF)N/AN/AN/A
3D CAD ModelViewViewView
#