DK Series Memory Keys

DK Series Memory Keys

Models: DK1Kb, DK4Kb, DK16Kb

Datakey’s DK Series is an ultra-rugged, key-shaped, portable data carrier that allows you to store and transport data.  Each device contains a 1 Kbit, 4 Kbit, or 16 Kbit non-volatile, serial Microwire EEPROM that can be read, erased, and written to via...

  • Keys & Tokens
  • Memory Capacity1 Kb - 16 Kb
  • InterfaceMicrowire
  • Memory TechnologyEEPROM
  • Contact Life15,000 cycles min.
  • Mates with:All Keyceptacles, KeyLink III programmers
KC16/64PCB

KC16/64PCB

Models: KC16/64PCB, KC16/64 Rugged

This product is End of Life.  The KC16/64PCB Keyceptacle access device is a universal interface connector that supports Datakey’s PK Series of parallel memory Keys for a direct PC board format.  Designed for simple, reliable operation, the KC16/64PCB...

  • Receptacle
  • Mounting TypeBoard Mount (TH)
  • Mounting StyleRight Angle Board Edge
  • Operating Life200,000 cycles min.
  • Used with:Parallel Memory Keys
KCUPK

KCUPK

Models: KCUPK

This product is End of Life.  The KCUPK Keyceptacle is a universal interface connector that supports Datakey’s complete family of parallel memory keys.  Designed for simple, reliable operation, the KCUPK unit works with the same simple motion as any...

  • Receptacles
  • Mounting TypePanel Mount
  • Operating Life200,000 cycles min.
  • IP RatingNA
  • Used with:Parallel Memory Keys
KeyLink II

KeyLink II

Models: KeyLink IIs (RS-232), KeyLink IIse (230 Vac), KeyLink IIu (USB)

Designed for ease of integration, the KeyLink II programmers are stand-alone interface units that connect quickly to host hardware via a standard RS-232 or USB port.  The KeyLink II programmers support interchangeable use of serial memory keys including all...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F) or USB A male to USB B male
  • Contact Life200,000 cycles min.
  • Used with:All serial EEPROM and NOR flash keys, except IEK.

    For better throughput with NOR flash keys use the KeyLink III.
  • Supported OSThe configuration software runs on Windows PC.
KeyLink II Development Kit

KeyLink II Development Kit

Models: KeyLink IIs Dev Kit, KeyLink IIu Dev Kit, KeyLink IIse Dev Kit

The KeyLink II Development Kit provides all the necessary tools to build a simulated system to test its abilities and benefits.  It is a cost-effective way to bring your products to market faster, reduce design and production cost, and to respond quickly to...

  • Development Kit
  • ProgrammerKeyLink IIs/KeyLink IIu/KeyLink IIse
  • Portable Memory DeviceTwo memory samples included - user's choice (subject to availability)
  • ReceptaclesKC4210 panel-mount receptacle
    KC4210PCB board-mount receptacle
    Other models by request and availability.
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Keytroller II

Keytroller II

Models: Keytroller IIs (RS-232), Keytroller IIu (USB)

Designed for ease of integration, the Keytroller II Programmer is a single board, serial key interface unit that connects quickly to host hardware via a standard RS-232 port or USB port.  Lightweight and space-saving, the unit includes...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F) or USB 2.0 Full Speed (Type B Connector)
  • Contact Life200,000 cycles min.
  • Used with:All serial EEPROM and NOR flash memory keys except IEK
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Keytroller II Development Kit

Keytroller II Development Kit

Models: Keytroller IIs Dev Kit, Keytroller IIu Dev Kit

The Keytroller II Development Kit provides all the necessary tools to build a simulated system to test its abilities and benefits.  It is a cost-effective way to bring your products to market faster, reduce design and production cost, and to respond quickly to...

  • Development Kit
  • ProgrammerKeytroller IIs or Keytroller IIu
  • Portable Memory DeviceTwo memory samples included - user's choice (subject to availability)
  • ReceptaclesKC4210 panel-mount receptacle
    Other models by request and availability.
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
PK Series Parallel Memory Keys

PK Series Parallel Memory Keys

Models: PK64KC, PK256KB

This product is End of Life.  The PK64KC and PK256KB Parallel Memory Keys are convenient data carriers with 64 Kb or 256 Kb EEPROM memories.  These rugged, read/write keys are designed for use in heavy-duty commercial and industrial applications that require...

  • Keys & Tokens
  • Memory Capacity64 Kb - 256 Kb
  • InterfaceParallel
  • Memory TechnologyEEPROM
  • Contact Life15,000 cycles min.
  • Mates with:KCUPK and KC16/64/PCB receptacles, PKS-703 programmer
PKS-703

PKS-703

Models: PKS-703, PKS703e

This product is End of Life.  The PKS-703 is a self-contained read/write interface unit that connects quickly to host hardware via a standard RS-232 port.  The PKS-703 supports parallel re-programmable memory Keys.  Lightweight and space-saving, the...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F)
  • Contact Life200,000 cycles min.
  • Used with:Parellel memory keys: PK64KC and PK256KB (both obsolete)
  • Supported OSNo software/devices included.
SlimLink II

SlimLink II

Models: SlimLink IIs (RS-232), SlimLink IIse (230 Vac), SlimLink IIu (USB)

Designed for ease of integration, the SlimLink II Programmers are stand-alone interface units that connect quickly to host hardware via a standard RS-232 or USB port.  The SlimLink II programmers support interchangeable use of serial memory SlimLine Tokens or...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F) or USB 2.0 Full Speed (Type B Connector)
  • Contact Life50,000 cycles min.
  • Used with:All serial EEPROM and NOR flash tokens, except IET.

    For better throughput with NOR flash tokens use the KeyLink III.
  • Supported OSThe configuration software runs on Windows PC.
SlimLink II Development Kit

SlimLink II Development Kit

Models: SlimLink IIs Dev Kit, SlimLink IIu Dev Kit, SlimLink IIse Dev Kit

The SlimLink II Development Kit provides all the necessary tools to build a simulated system to test its abilities and benefits.  It is a cost-effective way to bring your products to market faster, reduce design and production cost, and to respond quickly to...

  • Development Kit
  • ProgrammerSlimLink IIs/SlimLink IIu/SlimLink IIse
  • Portable Memory DeviceTwo memory samples included - user's choice (subject to availability)
  • ReceptaclesSR4210 panel-mount receptacle
    SR4210PCB board-mount receptacle
    Other models by request and availability.
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Slimtroller II

Slimtroller II

Models: Slimtroller IIs (RS-232), Slimtroller IIu (USB)

Designed for ease of integration, the Slimtroller II Programmer is a single board, serial token interface unit that connects quickly to host hardware via a standard RS-232 port or USB port.  Lightweight and space-saving, the unit includes...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F) or USB 2.0 Full Speed (Type B Connector)
  • Contact Life50,000 cycles min.
  • Used with:All serial EEPROM and NOR flash memory tokens except IET and IEX
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Slimtroller II Development Kit

Slimtroller II Development Kit

Models: Slimtroller IIs Dev Kit, Slimtroller IIu Dev Kit

The Slimtroller II Development Kit provides all the necessary tools to build a simulated system to test its abilities and benefits.  It is a cost-effective way to bring your products to market faster, reduce design and production cost, and to respond quickly to...

  • Development Kit
  • ProgrammerSlimtroller IIs or Slimtroller IIu
  • Portable Memory DeviceTwo memory samples included - user's choice (subject to availability)
  • ReceptaclesSR4210 panel-mount receptacle
    SR4210PCB board-mount receptacle
    Other models by request and availability.
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Unitroller II

Unitroller II

Models: Unitroller IIu (USB), Unitroller IIs (RS-232)

Designed for ease of integration, the Unitroller II Programmer is a single board, serial key/token interface unit that connects quickly to host hardware via a standard RS-232 port or USB port.  Lightweight and space-saving, the unit includes...

  • Readers/Writers
  • PC InterfaceRS-232 (DB9F) or USB 2.0 Full Speed (Type B Connector)
  • Contact LifeReference datasheet for receptacle
  • Used with:All serial EEPROM and NOR flash memory keys and tokens except IEK, IET and IEX
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit
Unitroller II Development Kit

Unitroller II Development Kit

Models: Unitroller IIs Dev Kit, Unitroller IIu Dev Kit

The Unitroller II Development Kit provides all the necessary tools to build a simulated system to test its abilities and benefits.  It is a cost-effective way to bring your products to market faster, reduce design and production cost, and to respond quickly...

  • Development Kit
  • ProgrammerUnitroller IIs or Unitroller IIu
  • Portable Memory DeviceTwo memory samples included - user's choice (subject to availability)
  • ReceptaclesKC4210 panel-mount receptacle
    SR4210 panel-mount receptacle
    Other models by request and availability.
  • Supported OSWindows XP, Windows 7, Windows 8 32 and 64-bit