SlimLink II

Legacy

Designed for ease of integration, the SlimLink II Programmers are stand-alone interface units that connect quickly to host hardware via a standard RS-232 or USB port.  The SlimLink II programmers support interchangeable use of serial memory SlimLine Tokens or Extended SlimLine Tokens, including all of Datakey's Microwire, I2C and SPI interface protocols.   Each supported token is read and/or written by sending commands and data over the communication interface.  The programmer will respond with feedback data and a status response allowing the user to easily monitor the communications with the SlimLink II programmer. The SlimLink II Programmer is packaged with a communication cable, configuration software, external power supply (for RS-232) and an integration manual.  A Serial Development Kit is available which also includes token samples as well as receptacle samples.

Specifications

SlimLink IIs SlimLink IIu SlimLink IIse
Part Number607-0068-000A607-0068-001A607-0068-002A
Development Kit Part No.Not recommended for new designs. Use SlimLink III.Not recommended for new designs. Use SlimLink III.Not recommended for new designs. Use SlimLink III.
PC InterfaceRS-232 (DB9F)USB 2.0 Full Speed (Type B Connector)RS-232 (DB9F)
Power9 VDC via 3.5 mm jack, 230 VAC to 9 VDC supply included.5.0 V, supplied by USB (50 mA typical)9 VDC via 3.5 mm jack, 230 VAC to 9 VDC supply included.
Throughput2400, 4800, 9600 or 19200 baudRead: 4 Mbps
Write: 1 Mbps
(speeds typical)
2400, 4800, 9600 or 19200 baud
Receptacle Contact Life50,000 cycles min.50,000 cycles min.50,000 cycles min.
Operational Temperature0 ˚C to +70 ˚C0 ˚C to +70 ˚C0 ˚C to +70 ˚C
Storage Temperature-40 ˚C to +85 ˚C-40 ˚C to +85 ˚C-40 ˚C to +85 ˚C
Used WithAll serial EEPROM and NOR flash tokens, except IET.

For better throughput with NOR flash tokens use the SlimLink III.
All serial EEPROM and NOR flash tokens, except IET.

For better throughput with NOR flash tokens use the SlimLink III.
All serial EEPROM and NOR flash tokens, except IET.

For better throughput with NOR flash tokens use the SlimLink III.
Supporting Operating SystemsThe configuration software runs on Windows PC.The configuration software runs on Windows PC.The configuration software runs on Windows PC.
Included AccessoriesRubber feet, hook-and-loop mounting pads, 6' DB9M to DB9F cable and 230 VAC to 9 VDC power supplyRubber feet, hook-and-loop mounting pads, 6' USB A male to USB B male cable.Rubber feet, hook-and-loop mounting pads, 6' DB9M to DB9F cable and 230 VAC to 9 VDC power supply
ComplianceRoHS CompliantRoHS CompliantRoHS Compliant
Other Features

NA

NA

NA

Datasheet (PDF)N/AN/AN/A
3D CAD ModelViewViewView
#