Reflow Instructions for SlimLine™ Surface-Mount Receptacles

FAQ Article

The following reflects the absolute maximum temperature profile for SlimLine™ surface-mount receptacles (SR4210SMT, SR4220SMT, SR4230SMT):

Gradient to Oven Reflow Zone 0.4 °C/sec to 1 °C/sec
Reflow Zone Set Temperature 250 °C
Time Above Reflow Zone Set Temperature 70 sec
Peak Temperature of Actual Receptacle 255 °C
Maximum Passes Through Reflow 4

 Note:  If blistering of the plastic is observed, dry the receptacles for 2 hours at 125 °C.

 

Below is a temperature profile of a SlimLine™ receptacle subjected to the maximums.  The thermocouple was placed on top of the receptacle.