Datasheets

Bar receptacles mate with all Bar memory tokens and are designed to mount on the surface or in a corner of an OEM device with only the contact pins extending inside for electrical connection. This minimizes the amount of interior space required. Bar receptacles have been tested to a host of MIL-STD-810 environmental specifications.

"Flat Target" Bar receptacles mate with all Bar memory tokens and are designed to mount on the surface or in a corner of an OEM device with nothing extending inside. Spring probes may be used to make contact with the flat targets on the bottom of the receptacle. This minimizes the amount of interior space required. Bar receptacles have been tested to a host of MIL-STD-810 environmental specifications.

The DFX PC Adapter provides a convenient way to read data from or write data to DFX RUGGEDrive™ memory tokens using a PC. The adapter plugs into USB type A ports. When a DFX token is then inserted, it appears to the computer as a USB Mass Storage device (i.e. a USB flash drive). No special drivers should be needed.

Datakey DFX RUGGEDrive memory tokens are OBSOLETE and replaced by the Industrial DFX RUGGEDrive line. This datasheet is provided for historical purposes only. Do not use for new designs.
Datakey DFX memory tokens deliver SD card functionality in a more robust and secure form factor than consumer and industrial SD cards. Electrically, the tokens provide a standard SD interface, including SPI mode for embedded applications.

Datakey DFX-I memory tokens deliver SD card functionality in a more robust and secure form factor than consumer and industrial SD cards. As part of the Industrial RUGGEDrive™ line, DFX-I memory tokens feature SD memory in a proprietary form factor and are rated for operation from -40°C to +85°C. DFX-I memory tokens feature 3D TLC NAND flash, where DFX-IS tokens utilize 3D TLC NAND flash operating in pseudo-SLC mode.

The DK series of memory keys provides an ultra-rugged, key-shaped, portable memory device for data storage/transport. The key can also be used as a re-writable credential. Each key contains an EEPROM with a Microwire serial interface and 1Kb, 4Kb, or 16Kb of non-volatile memory.

The IAT10.5Kb CryptoAuthentication™ memory token utilizes Microchip’s ATECC608A IC, part of their CryptoAuthentication family of high-security hardware authentication ICs. The IAT10.5Kb memory token takes the ATECC608A’s security features and puts them into a physically robust portable memory device.

The IAT4.5Kb CryptoAuthentication™ memory token utilizes Microchip’s ATSHA204A IC, part of their CryptoAuthentication family of high-security hardware authentication ICs. The IAT4.5Kb memory token takes the ATSHA204A’s security features and puts them into a physically robust portable memory device.

The IAX10.5Kb CryptoAuthentication™ extended length memory token utilizes Microchip’s ATECC608A IC, part of their CryptoAuthentication family of high-security hardware authentication ICs. The IAX10.5Kb memory token takes the ATECC608A’s security features and puts them into a physically robust portable memory device.

The IAX4.5Kb CryptoAuthentication™ extended length memory token utilizes Microchip’s ATSHA204A IC, part of their CryptoAuthentication family of high-security hardware authentication ICs. The IAX4.5Kb memory token takes the ATSHA204A’s security features and puts them into a physically robust portable memory device.

The ISB series of Bar memory tokens provides an ultra-rugged portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an I2C serial interface and 1Kb, 4Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature a writable label and have undergone MIL-STD-810 environmental testing.

The ISK series of memory keys provides an ultra-rugged, key-shaped, portable memory device for data storage/transport. The key can also be used as a re-writable credential. Each key contains an EEPROM with an I2C serial interface and 1Kb, 4Kb, 16Kb, 64Kb or 256Kb of non-volatile memory.

The ISP series of plug memory tokens contain 1 Kb to 256 Kb of non-volatile, serial I2C EEPROM memory. The ISP token features a locking mechanism, making it well-suited for high-vibration applications. It also uses a foldable bail, providing a means of easily inserting and removing the token, while folding flat to allow for a flush mount.

The IST series of SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an I2C serial interface and 1Kb, 4Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The ISX series of extended length SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an I2C serial interface and 1Kb, 4Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The KC4210 panel-mount key receptacle interfaces with all Datakey serial memory keys. Keys are inserted and rotated approximately one-quarter turn where they make contact and lock into place. The receptacle uses built-in retaining tabs for quick and easy installation – no additional mounting hardware is needed.

The KC4210 panel-mount key receptacle interfaces with all Datakey serial memory keys. Keys are inserted and rotated approximately one-quarter turn where they make contact and lock into place. The receptacle is equipped with green and red LEDs to indicate when it safe for the user to insert or remove a key.

The KC4210PCB board-mount key receptacle interfaces with all Datakey serial memory keys. Keys are inserted and rotated approximately one-quarter turn where they make contact and lock into place. The receptacle utilizes redundant contacts that provide a reliable connection over an operating life of at least 200,000 insertion/removal cycles.

KeyLink III programmers provide a convenient way to read data from or write data to Datakey Serial Memory keys using a Windows PC. The programmers are designed for tabletop use and connect to a PC’s USB port.

The KSD panel-mount receptacle mates with all Datakey Plug memory tokens, including the KSD, ISP and SSP series tokens. The receptacle is designed for high-vibration applications, as the plug token locks into the receptacle with a one-eighth-turn of the token’s lock top. The receptacle is also designed to be flush-mounted, so no part of the receptacle protrudes from the panel. Additionally, the bail/handle of the plug token also folds flat providing for a completely flush-mounted solution, even when mated.

The KSD series of plug memory tokens contain 1 Kb to 4 Kb of non-volatile, serial Microwire EEPROM memory. The KSD token features a locking mechanism, making it well-suited for high-vibration applications. It also uses a foldable bail, providing a means of easily inserting and removing the token, while folding flat to allow for a flush mount.

The LCB series of Bar memory tokens provides an ultra-rugged portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with a Microwire serial interface and 1Kb, 4Kb or 16Kb of non-volatile memory. The tokens feature a writable label and have undergone MIL-STD-810 environmental testing.

The LCK series of memory keys provides an ultra-rugged, key-shaped, portable memory device for data storage/transport. The key can also be used as a re-writable credential. Each key contains an EEPROM with a Microwire serial interface and 1Kb, 4Kb or 16Kb of non-volatile memory.

The LCS series of SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with a Microwire serial interface and 1Kb, 4Kb or 16Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The LCX series of extended length SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with a Microwire serial interface and 1Kb, 4Kb or 16Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The Read-Only DFX PC Adapter provides a convenient way to read data from DFX RUGGEDrive™ memory tokens using a PC, while preventing any writes/changes to the data on the tokens. The proprietary form factor of the DFX memory tokens, along with the read-only adapter, prevents accidental erasure or changes to the logged data.

SlimLink III programmers provide a convenient way to read data from or write data to Datakey Serial Memory tokens using a Windows PC. The programmers are designed for tabletop use and connect to a PC’s USB port.

The special SR4410EI panel-mount receptacle with SPI line driver circuitry is designed to work with SST, SSM, and SSX series of SPI-EEPROM memory tokens. The receptacle contains a line driver/buffer on the receptacle’s MISO line, providing extra drive for longer cable runs, allowing the receptacle to be remotely mounted from the host. The host design should incorporate matching line driver/buffers for the other signal lines.

The SR4210 panel-mount receptacle mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The back of the receptacle features a 10-pin (0.10" pitch) header. The SR4210 is secured using a retention clip that is provided with each receptacle.

SR4210PCB board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens (see token data sheets for more details). The SR4210PCB receptacles feature a right-angle, board-edge design with through-hole contacts.

The SR4210PCB CryptoAuthentication™ extension board allows Datakey CryptoAuthentication memory tokens to be used with Microchip’s CryptoAuthentication SOIC XPRO Starter Kit (DM320109). The extension board plugs into the extension ports on the Microchip ATSAMD21-XPRO development board (included in the starter kit).

SR4210SM board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine and RUGGEDrive™ memory tokens. The surface-mount receptacle features a right-angle, board-edge design and is an improved version of the SR4210SMT. The receptacles can be pick-and-placed from their tray and are suitable for use in a reflow oven process.

The SR4210SMT receptacle is OBSOLETE and replaced by the SR4210SM.
This datasheet is provided for historical purposes only. Do not use for new designs.
The SR4210SMT board-mount receptacle mates with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens. The receptacle features a right-angle, board-edge design.

SR4220PCB board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens (see token data sheets for more details). The SR4220PCB receptacles feature a right-angle, board-edge design with through-hole contacts.

SR4220SM board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine and RUGGEDrive™ memory tokens. The surface-mount receptacle features a right-angle, board-edge design and is an improved version of the SR4220SMT. The receptacles can be pick-and-placed from their tray and are suitable for use in a reflow oven process.

The SR4220SMT receptacle is OBSOLETE and replaced by the SR4220SM.
This datasheet is provided for historical purposes only. Do not use for new designs.
The SR4220SMT board-mount receptacle mates with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens. The receptacle features a right-angle, board-edge design.

The SR4220VRT board-mount receptacle mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The SR4220VRT is a vertical, board-mount receptacle with through-hole contacts.

The SR42220VRT CryptoAuthentication™ extension board allows Datakey CryptoAuthentication memory tokens to be used with Microchip’s CryptoAuthentication SOIC XPRO Starter Kit (DM320109). The extension board plugs into the extension ports on the Microchip ATSAMD21-XPRO development board (included in the starter kit).

SR4230PCB board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens (see token data sheets for more details). SR4230PCB receptacles feature a right-angle, board-edge design.

SR4230SM board-mount receptacles mate with all Datakey SlimLine™, Extended SlimLine and RUGGEDrive™ memory tokens. The surface-mount receptacle features a right-angle, board-edge design and is an improved version of the SR4230SMT. The receptacles can be pick-and-placed from their tray and are suitable for use in a reflow oven process.

The SR4230SMT receptacle is OBSOLETE and replaced by the SR4230SM.
This datasheet is provided for historical purposes only. Do not use for new designs.
The SR4230SMT board-mount receptacle mates with all Datakey SlimLine™, Extended SlimLine, NFX, and RUGGEDrive™ memory tokens. The receptacle features a right-angle, board-edge design.

The SR4310 series of panel-mount receptacles mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The back of the receptacle features a 10-pin (0.10" pitch) header. The SR4310 is offered in three versions: IP65, IP67 and IP67 with EM reduction.

The SR4310xL series of panel-mount receptacles mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The back of the receptacle features a locking Molex CLIK-Mate™ 8-pin connector. The SR4310xL is offered in three versions: IP65, IP67 and IP67 with EM reduction.

The SR4410 series of panel-mount receptacles mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The back of the receptacle features a 10-pin (0.10" pitch) header. The SR4410 mounts from behind the panel providing for a clean look. It is offered in three versions: IP65, IP67 and IP67 with EM reduction.

The SR4410xL series of panel-mount receptacles mates with all Datakey SlimLine™, Extended SlimLine, NFX and RUGGEDrive™ memory tokens. The back of the receptacle features a locking Molex CLIK-Mate™ 8-pin connector. The SR4410xL mounts from behind the panel providing for a clean look. It is offered in three versions: IP65, IP67 and IP67 with EM reduction.

The SSB series of Bar memory tokens provides an ultra-rugged portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an SPI serial interface and 2Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature a writable label and have undergone MIL-STD-810 environmental testing.

The SSK series of memory keys provides an ultra-rugged, key-shaped, portable memory device for data storage/transport. The key can also be used as a re-writable credential. Each key contains an EEPROM with an SPI serial interface and 2Kb, 16Kb, 64Kb or 256Kb of non-volatile memory.

The SSP series of plug memory tokens contain 2 Kb to 256 Kb of non-volatile, serial SPI EEPROM memory. The SSP token features a locking mechanism, making it well-suited for high-vibration applications. It also uses a foldable bail, providing a means of easily inserting and removing the token, while folding flat to allow for a flush mount.

The SST series of SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an SPI serial interface and 2Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The SSX series of extended length SlimLine™ memory tokens provides an ultra-rugged, portable memory device for data storage/transport. The memory token can also be used as a re-writable credential. Each token contains an EEPROM with an SPI serial interface and 2Kb, 16Kb, 64Kb or 256Kb of non-volatile memory. The tokens feature redundant contacts so they can be inserted either side up.

The UFX PC Adapter provides a convenient way to read data from or write data to UFX RUGGEDrive™ memory tokens using a PC. The adapter plugs into USB type A ports. When a UFX token is then inserted, it appears to the computer as a USB Mass Storage device (i.e. a USB flash drive). No special drivers should be needed.

UFX memory tokens are OBSOLETE and replaced by UFX-I and UFX-IS RUGGEDrive tokens.
Datakey UFX memory tokens deliver USB flash drive functionality in a more robust and secure form factor than consumer flash drives. The tokens are available in capacities from 4 GB to 64 GB and utilize a USB 2.0 Hi-Speed interface. Each token contains a unique serial number which can be used for token identification or for encrypting on-board data.

Datakey UFX-I memory tokens deliver USB flash drive functionality in a more robust and secure form factor than consumer flash drives. As part of the Industrial RUGGEDrive line, UFX-I memory tokens are rated for operation from -40°C to +85°C. Each token contains a unique serial number which can be used for token identification or for encrypting on-board data. UFX-I tokens feature 3D TLC NAND flash, where UFX-IS tokens utilize 3D TLC NAND flash operating in pseudo-SLC mode.

Unitroller III, Keytroller III and Slimtroller III programmers (Series III programmers) provide a convenient way to read data from or write data to Datakey Serial Memory keys and tokens using a Windows PC. The programmers are designed for mounting in an enclosure where they would connect to a host computer’s USB port.

The UR4210 panel-mount receptacle mates with Datakey UFX RUGGEDrive™ (USB) memory tokens, providing a USB 2.0 Hi-Speed interface for embedded systems. The back of the UR4210 receptacle features a standard 5-pin motherboard header for easy and quick integration into embedded systems. Standard cables connect the UR4210 to either a 5-pin 0.10” header or a USB Type A receptacle.

The UR4310 panel-mount receptacle mates with Datakey UFX RUGGEDrive™ (USB) memory tokens, providing a USB 2.0 Hi-Speed interface for embedded systems. The back of the UR4310 receptacle features a standard 5-pin motherboard header for easy and quick integration into embedded systems. Standard cables connect the UR4310 to either a 5-pin 0.10” header or a USB Type A receptacle. The UR4310 is offered in three versions: IP65, IP67 and IP67 with EM reduction.

The UR4410 panel-mount receptacle mates with Datakey UFX RUGGEDrive™ (USB) memory tokens, providing a USB 2.0 Hi-Speed interface for embedded systems. The back of the UR4410 receptacle features a standard 5-pin motherboard header for easy and quick integration into embedded systems. Standard cables connect the UR4410 to either a 5-pin 0.10” header or a USB Type A receptacle. The UR4410 is offered in three versions: IP65, IP67 and IP67 with EM reduction.